• Mark created a new forum post in 29
    Hydraulic pressure switch. Located just inboard of pylon trailing edge.

    Right system switch shown.
      
      
     
      
      
     
      
      
    I measured about 42 Ohms across pins 1 & 3.
    22 Ohms from pin 1 to 3. System not pressurized.
      
      
     
      
      
     
      
      
     
      
     
    1. View Thread →
    0
    0
    0
    0
    0
    0
    Post is under moderation
    Stream item published successfully. Item will now be visible on your stream.
Unable to load tooltip content.