Mark

A somewhat easier problem to figure out, but just a short post to show some of the Anti-Skid components.

Deferral of complete Anti-Skid system. Checked the control unit for history.....
  
     
  
Un-ass the box..... shoot the #2 transducer. Open. Shoot another one just to see what it should be.
  
     
     
  
After pulling the #2 hubcap and removing the transducer..... what do I find? No plug hooked up. It's laying a foot back in the axle.
  
     
     
  
Plug back on.... transducer reinstalled..... hubcap back on.....
  
     
  
Good reading from rack. Good functional test. Deferral cleared.