• rickdelman
  • jake ounce
  • Calvin
  • amc0318
  • jochute
  • Gus123
  • JoeBlow
  • jschaedig
  • Speedfreak96
  • DeputyLOL
  • fredsmith
  • MG5775
  • Total Users:32
  • Latest Member:Rick Del Manzano
  • Total Posts:345
  • Total Topics:179
  • Total Sections:17
  • Total Categories:138
  • Today Open:0
  • Yesterday Open:0
  • Today Answer:0
  • Yesterday Answer:0
Wait a minute, while we are rendering the calendar

   
Suppression Diode
 
   
   
 

 

The majority of relays installed on aircraft will have a diode installed in parallel with the relay coil. This diode is often referred to as a "Suppression Diode". The diode can be installed internal as part of the relay assembly or external as a standalone component. The purpose of the diode is for circuit protection.

 

All inductors (relay coils included) will build up an electrical field around themselves when voltage is present. If the voltage is removed the field will collapse. As the field collapses a current is induced in the wiring connected to the coil. The suppression diode gives a path for this current to dissipate.


The diode is installed in the "Reverse Bias" position to the control voltage. Current cannot flow through it. All the voltage will be present for the relay coil to energize. The circuit will remain in this condition until the control voltage is removed. With the voltage removed, the coil field will collapse. The induced current is in the "Forward Bias" relationship to the diode, so it basically reduces the potential back across the coil. No current will be felt in the control voltage input wire, reducing the possibility of computer or component damage.

 

 The suppression diode must be accounted for when continuity checking a circuit that has a relay coil in it. It is very possible to read through just the diode when the relay coil is open. Isolation of the diode might be needed for verification of a good circuit.

 

sd3

 sd1
 sd2
   
   
  suppression img
   
   

THE INFORMATION PRESENTED ON THIS SITE IS TO BE USED AS A GUIDE.

APPROVED AIRCRAFT MANUFACTURER MAINTENANCE MANUAL PROCEDURES SHOULD ALWAYS BE FOLLOWED.

     

Overall Rating (0)

0 out of 5 stars
  • No comments found
English Arabic French German Italian Japanese Korean Norwegian Portuguese Russian Spanish

 Random acts of kindness are contagious!!